Reading and Reviewing Welding Documents

Understanding Welding Procedure Specifications (WPS) and Procedure Qualifications Records (PQR)

In this course, “Reading and Reviewing Welding Documents”, you will learn everything you need to know about the key welding documents — the Welding Procedure Specification (WPS) and the Procedure Qualifications Records (PQR) — and their fit within an company’s welding program.

What you’ll learn

  • The key components of a company’s welding program.
  • An overview of the major welding documents.
  • What is a PQR? And what is their purpose?.
  • What is a WPS? And how is it used?.
  • What to look for in a Welding Procedure Specification (WPS).
  • What to look for in a Procedure Qualification Record (PQR).
  • How to perform “sanity checks” on your welding documents.
  • How to record changes to welding documents.
  • How welding documents align with industry standards.
  • P numbers, F numbers and A numbers.
  • Downloadable examples and templates of PQR’s and WPS’s.

Course Content

  • Introduction –> 18 lectures • 2hr 47min.

Reading and Reviewing Welding Documents

Requirements

In this course, “Reading and Reviewing Welding Documents”, you will learn everything you need to know about the key welding documents — the Welding Procedure Specification (WPS) and the Procedure Qualifications Records (PQR) — and their fit within an company’s welding program.

The WPS is essentially the recipe, the work instructions welders use to correctly complete a particular weld. Variables like base material, filler material, position, electrical parameters, and shielding gas are specified on the WPS. Engineers develop these WPS’s based on industry codes, manufacturers’ recommendations, and their own experience and experimentation.

The PQR is used to determine that the proposed welding operation is capable of producing welds that meet the engineering requirements for the intended application. The purpose of the PQR is to establish the finished properties of a particular welding procedure. This is done by recording the results of certain mechanical properties tests on the PQR. Tests like tensile, elongation, and Charpy impact are tests commonly found on a PQR.

Given the high level of detail on these documents, mistakes are common … even for seasoned welding engineers. This is where the skill of a document auditor really pays off. By understanding the function and intent of these documents, an engineering or quality professional can save their company untold costs and delays.

In this class, you will learn:

  • The key components of a company’s welding program
  • An overview of the major welding documents
  • What is a PQR? And what is their purpose?
  • What is a WPS? And how is it used?
  • What to look for in a Welding Procedure Specification (WPS)
  • What to look for in a Procedure Qualification Record (PQR)
  • How to perform “sanity checks” on your welding documents
  • How to record changes to welding documents
  • How welding documents align with industry standards
  • The most COMMON MISTAKES found on welding documents
  • P numbers, F numbers and A numbers

By the time you’re done with this class, you will have the skills to effectively review WPS’s and PQR’s to verify their accuracy and usefulness.

And as with all Udemy classes, once you sign up for this course, you have LIFETIME ACCESS to it’s contents … all the lectures, all the downloadable resources, and anything added to the course down the road. So sign up today to advance your welding and weld program skills!!

Get Tutorial