Learn Finite element analysis & simulation with Abaqus CAE
ABAQUS CAE is one of the most widely used Finite Element Analysis software in the world. ABAQUS was developed by Dassault SYSTEMS.
What you’ll learn
- Analysis and Engineering simulation.
- linear static analysis.
- non linear analysis.
- contact Analysis.
- Thermal Analysis.
- Dynamic Simulation.
- meshing in Abaqus.
Course Content
- Introduction –> 5 lectures • 26min.
- Basics of FEA (finite element analysis) –> 5 lectures • 46min.
- 1-Dimensional Analysis –> 7 lectures • 59min.
- Linear Static Analysis –> 4 lectures • 34min.
- Mid Surfacing Analysis –> 3 lectures • 24min.
- Analysis of Truss Members –> 4 lectures • 24min.
- Buckling Analysis –> 4 lectures • 29min.
- Heat Transfer Analysis –> 4 lectures • 33min.
- Transient Heat Transfer Analysis –> 3 lectures • 23min.
- Non Linear Analysis –> 7 lectures • 1hr 8min.
- Heat Generated Due to Friction –> 4 lectures • 35min.
- Pressure Vessel Analysis –> 2 lectures • 16min.
- 3 Point Bending Analysis –> 3 lectures • 28min.
- Dynamic Simulation –> 3 lectures • 31min.
- Frequency Response Analysis –> 3 lectures • 36min.
- Impact Analysis –> 5 lectures • 41min.
- Impact Analysis of Automotive Crash Box –> 7 lectures • 51min.
- Deflection Due to Self Weight –> 3 lectures • 18min.
- Time Dependent Load –> 4 lectures • 27min.
Requirements
ABAQUS CAE is one of the most widely used Finite Element Analysis software in the world. ABAQUS was developed by Dassault SYSTEMS.
in this course, you will learn ABAQUS from basics to advance level.
the main content of this course is given below
- 1-D beam Analysis
- Linear Static Analysis
- Non-linear Analysis
- Geometric non-linearity
- material non-linearity
- contact non-linearity
- Buckling Analysis
- Heat Transfer Problems
- Conduction Analysis
- Convection Analysis
- Transient Heat Analysis Problem
- Heat Generated Due to Friction
- Dynamic Analysis
- Modal Analysis
- Frequency Response Analysis
- Impact & drop test
- safety analysis of Automotive crash box
- Debugging the ABAQUS solutionsin this course, we will start with a very simple analysis. after that, we will move on to more complex problems.
you will get access to all the files that are used in this course along with the lectures.
in case of any query, feel free to contact me anytime.
Course language – English
software version – ABAQUS 2019
Course Requirements
- Abaqus software
- basic knowledge of mechanics of material, machine design, finite element analysis would be advantageous. however, I will also explain basic stuff during the course.
who should take this course
- this course is for everyone who wants to learn Abaqus.
- mechanical engineers
- Design engineers
- Master and PhD students
- Simulation Engineers
why take this course
- To Learn Finite element Analysis
- To perform Real Life Problems & simulations
- to get a job as CAE/ FEA engineers
- confidentially specify ABAQUS on your resume